Portable chain link panels for a temporary perimeter
This product uses diamond-pattern chain link mesh in a tubular perimeter frame. The illustrated panel has a central upright and separate support feet. It is a different construction from the rectangular welded-mesh panels in our Canadian temporary fence range.
Use the product enquiry to specify the panel size and complete fence-line arrangement required for your project. Mesh, wire, frame and support details need to be agreed together; a photograph does not establish a load rating or a complete installation specification.
Size options and quotation details
The listed enquiry range includes 4, 6 and 8 ft panel heights and lengths from 10 to 14 ft. Confirm the available height-and-length combination in the quotation before planning quantities or transport.
| Mesh construction | Diamond-pattern chain link mesh |
|---|---|
| Listed panel heights | 4, 6 or 8 ft; confirm the required configuration |
| Listed panel lengths | 10–14 ft; confirm the selected length |
| Frame and support | Tubular panel frame and separate feet, as illustrated; confirm tube dimensions, wall thickness, feet and connection hardware |
| Order-specific information | Mesh opening, wire diameter, finish, accessory quantities, packing and delivery destination |
These size choices are not interchangeable with the 6 × 8, 6 × 9.5 and 6 × 10 ft welded-panel specifications shown on the separate Canadian-style product page.
Plan the fence line, not just the panel count
Measure the boundary sections and mark vehicle gates, pedestrian access, corners and any changes in ground level. Divide each straight section by the selected panel length as a preliminary quantity check, then account for gates and the way panels connect. Nominal panel length alone does not establish the installed coverage of a finished line.
- Confirm feet and connection hardware for every joint and end point.
- Identify paved, soft or uneven ground so the proposed support arrangement can be reviewed.
- State whether signs, screening or banners will be attached. These can change wind loading and support requirements.
- Keep public access routes and emergency openings clear in the layout.
Temporary perimeter panels should not be assumed suitable for crowd pressure, fall protection or front-of-stage use. Obtain a site-specific design or competent installation advice where loading, exposure or local requirements demand it.
Chain link or welded mesh for this order?
The diamond mesh shown on this page identifies the chain link option. The Canadian-style alternative uses rectangular welded openings and a different panel-and-frame specification. Select the construction before comparing quotations so wire dimensions, frame sections and accessories refer to the same product.
For welded-panel sizes and finishes, use the Canadian temporary fence panel specifications. For related rolls, gates and posts, see the fencing product range.
Information to send with your enquiry
Send the intended use, panel height and length, approximate boundary length or panel quantity, site surface, required finish, gate needs and destination. Include any project specification for mesh, wire and frame dimensions. Ask Haisen to confirm the supplied accessory list, packed dimensions, weight and delivery terms against that specification.










Reviews
There are no reviews yet.