Custom outdoor kennels for U.S. sourcing
Custom Dog Kennel Manufacturer
Plan a custom outdoor dog kennel order with Haisen in China. Start from a welded-panel or chain-link model, then submit drawings, requested changes, quantities and U.S. delivery requirements for feasibility review and quotation.
What you can choose
Define the Custom Kennel Specification
Identify what changes from the reference model and what stays the same. Confirm feasible options and the approved specification before placing the production order.
Kennel Size and Frame
Provide a dimensioned layout in feet/inches or millimeters, including overall size, tube section, wall thickness, panel positions and roof supports.
01Wire and Mesh
Specify welded panels or chain link, actual wire diameter, mesh opening, edge treatment and coating. State units alongside any gauge reference.
02Gate and Feeding Door
Mark clear gate width, swing direction, hinges and latch on the drawing. If feeding access is needed, identify its position and request confirmation of the available configuration.
03Roof Cover and Installation
Specify cover requirements, fixing points, installation surface and proposed anchoring. Share site conditions so the quoted supply and installer responsibilities can be clarified.
04Dog kennel models
Choose a model close to your needs
Use a listed model as the reference, then mark each requested change. Ground areas below are calculated from listed dimensions and rounded; they do not establish animal capacity. Confirm feasibility before treating a revised layout as an approved design.
Welded Panel Dog Kennel
A rigid welded-panel option with a 32 sq ft footprint, roof cover and rotating, lockable feeding door. Compare panel handling and feeding access with the chain-link options.
See welded kennel details
2.06 m Square Chain-Link Kennel
A square chain-link option with about 45.7 sq ft of ground area. Check the space left after adding shelter and feeding equipment.
See product details
3.05 × 1.83 m Chain-Link Kennel
A rectangular chain-link option with about 60.1 sq ft of ground area. Check gate swing and site access where width is limited.
See product details
3.05 m Square Chain-Link Kennel
A square chain-link option with about 100.1 sq ft of ground area. Review layout, gate position and shelter space against the smaller models.
See product detailsHow to get a quote
From Buyer Specification to Order Approval
Prepare one order file: a dated drawing revision, dimensions and tolerances, component list, packing requirements and acceptance checks. Use the same revision for quotation, sample review and production approval.
Read the dog kennel buying guideTell us how the kennel will be used
Share intended use, available site space, reference model and quantity. For U.S. delivery, include the destination port or ZIP code and requested arrival date.
Choose the kennel parts
Mark requested changes on the layout. Confirm frame and mesh measurements, clear gate opening, cover, connectors and the hardware included in each set.
Confirm packing and delivery
Provide carton artwork or marking requirements, labels and manual requirements. Ask for carton count, packed dimensions and weight before comparing transport options.
Check and approve the order
Before approval, record the drawing revision, sample decision, quantity, inspection criteria and packing. Request MOQ, production timing, delivery terms and the evidence required before shipment in the written quote.
About Haisen
Work directly with the manufacturer
HEBEI HAISEN FENCE PRODUCTS CO., LTD has made pet enclosures and wire mesh products in Hebei, China since 2017. You can discuss dog kennel sizes, parts, packing and delivery with our team.
Helpful guides
Learn what to check before you order
These guides explain frames, mesh, gates, roof covers and site conditions in simple terms.

How to Choose an Outdoor Dog Kennel
Learn what to check in the frame, wire, mesh, gate, coating, joints and ground anchors before you buy.
Read the kennel guide
How to Choose a Kennel Roof Cover
Learn how cover size, drainage, wind, shade and the installation site affect roof-cover use.
Read the roof-cover guideCommon questions
Answers before you ask for a quote
Send your site and dog details so we can help you choose a suitable size and structure.
What types of dog kennels do you make?
We make outdoor kennels with welded wire panels or chain-link mesh. The final quote lists the tube, wire, mesh, roof cover, gate, latch, feeding door and packing included.
What documents help you quote a custom kennel?
Send a marked drawing or reference model, quantity by configuration, tube and wire dimensions, mesh openings, gates, cover and packing artwork. Include the U.S. port or ZIP code and requested delivery date. Identify any sample or inspection records your purchasing team needs.
Can you add our brand to the packing?
Send your artwork, carton marks, label and instruction requirements. We will review feasibility and identify the agreed items in the quote; confirm final proofs before production.
Does the roof cover protect all sides?
No. The cover protects the top area, but the wire sides stay open. Please also plan for shade, shelter, drainage, anchors and safe supervision at your site.
Tell us what you need
Get a quote for your dog kennel order
Email the reference model, marked drawing, quantity and U.S. destination. Include component changes, packaging artwork and requested arrival date so the quotation can distinguish product, packing and delivery requirements.
For commercial boarding projects, plan outdoor dog kennels for boarding facilities around staff access, cleaning routines and the layout of each run before confirming the specification.
Email: [email protected]